The most commonly used epoxy resin www.cronachedellacampania.it in the auto industry is the automotive grade. Epoxy resin is highly toxic, and there are many dangers associated with its use. A few basic safety precautions for curing should be kept in mind when using epoxy to coat your vehicle.
Make sure that the product you are working with does not contain any strong acidic solution. Many chemicals contained in epoxy products can react chemically and this may result in an accident. If you are looking to use a product containing citric acid, make sure that it is completely dry before applying it to your vehicle. You can also choose to use a mild acid or vinegar to apply your product.
Before you even begin your epoxy-coating project, make sure that you have adequate ventilation. A car is a very flammable object, and you may end up burning your hand if you have no ventilation at all. Keep the area in which you will be working at least 5 feet away from any nearby flame or open flame. Remove all loose clothing and shoes before you start working on your vehicle. Wear gloves and a respirator.
Do not touch your hands to any surface that has epoxy. If you accidentally get a splatter on your hands, blot it up as quickly as possible. Make sure that you take off your gloves carefully before working with the epoxy. Keep in mind that there may be a great deal of residue left behind from your gloves.
If you have a car that has more than one color that needs to be covered, then you will need to use two tools in order to accomplish this task. One tool is a brush, and the other is a scraper.
When first starting out, it is a good idea to use a brush to spread the epoxy over the car’s panels. Use a high quality vinyl mop to cover as much of the surface as possible. After you have covered the area with the mop, make sure to wet the mop in order to ensure that you are getting the resin onto the mop. You can make the mop wet by spraying some water on it and letting it sit for a while.
If you have a wide piece of metal that needs to be cleaned, then you will want to use a scraper to smooth out the surface. When you are scraping, it is a good idea to be gentle, as there may be surface rust present that needs to be removed.
After cleaning the wide areas of the car, you should clean the area that was coated by the resin with a rust removing cleaner. This will help to remove any excess that may be left on the surface. While it is important to remove any remaining residue, it is not necessary to scrub the surface at this point.
If there is any extra resin that is left over after the car is clean, you will want to mix up some white vinegar, a teaspoon of rubbing alcohol, and a half cup of water. Now you are ready to apply the resin.
Once you have made sure that the car’s finish is completely dry, you can proceed to apply the resin. You will want to make sure that the resin has dried completely before you begin to work with it. Apply a small amount of resin to a small area on the car, and wipe the resin off the surface in one solid swipe.
If you happen to find yourself with a bit more resin than is needed on your car’s panels, then just add another piece of resin to the mix. You can mix up as much resin as you need before you apply it to the car but never overfill the resin reservoir.
The final application should consist of multiple passes of the resin until it is completely cured. This process will allow the resin to dry completely before sealing the work piece back together and attaching the products.