Pinch Valve and Actuator

Limitations of pinch valves

A pinch valve is one of the simplest valve designs. It has a flexible elastomer body and can be closed by a mechanism or a fluid pressure. These valves can start media through a system and are easy to install and maintain. They are also light weight and can be used in systems requiring explosion-proof line closure. Although they have many advantages, they are not suitable for applications in which the media must be sterile or of high temperature.

Another drawback is that pinch valves have limited operational life. They often need more power or air pressure. They also tend to create an oval profile in the tubing, which can reduce the flow of viscous fluids. This can make the valve prone to clogging. In order to overcome this problem, some pinch valves use platinum-cured tubing. Soft tubing is not suitable for high-pressure applications, so it is important to choose a material that can withstand the high-pressure media that may pass through the valve.

Typical applications

Pinch valves are used for a wide variety of applications where high-velocity flow is required. These valves are totally integrated with the pipeline system, requiring no modifications to pipe structure, diameter, or flow medium. They also have the added advantage of being self-cleaning. When the valve is activated, particles accumulated on the inner sleeve wall are broken off, which helps extend the life of the valve. They are commonly used in laboratory equipment and medical instruments.

Typical pinch valve components include the stem, the internal sleeve, and the main housing. The stem is made from a flexible material such as rubber or plastic. Its material also needs to be corrosion-resistant and resistant to abrasion.

Limitations of electric motor actuators

Electric motor actuators for pinch valves have some limitations. These include a limited energy storage capacity and the ability to operate valves during a power failure. These actuators also have restrictions when it comes to speed. The demand for power increases with speed. ThisĀ about his makes it difficult to have a variable speed electric motor.

The Coulomb force is another limitation of electric actuators. Coulomb force is a force created by an electrostatic repulsive force. This force can be seen in an electroscope. It consists of a metal piece sticking out of a glass jar with thin metal leaves. When the electric current is applied, the metal leaves spread apart. The Coulomb force is responsible for this separation. The charge on the metal body is not permanent because it requires a large voltage to charge the body.

Limitations of pneumatic actuators

Pneumatic actuators for pinch valves are a common type of valve that allows operators to close and open the valve without moving the valve itself. They are also used in many industries. They have several benefits over conventional types of valves. For one, they are simpler to install. In addition, they have no mechanical parts or metal parts, making them ideal for handling almost any media.

Pneumatic actuators for pinch valves are available in different sizes, and the choice depends on the particular needs of the application. For example, an undersized actuator will cause the valve to slow down and produce a pressure surge. Oversized actuators will also increase the weight and cost of the valve, and may not respond as quickly as needed. Additionally, larger actuators may damage internal valve parts. Pneumatic actuators for pinch valves have some disadvantages, but there are also advantages.